[an error occurred while processing this directive]
 |
1930 Rugby 614 |
Special Features
- ½ ton capacity
- Steeldraulic four-wheel brakes
- Hydraulic shock absorbers
- Three forward speeds

|
Models
- Chassis with Panel Body $885.001
- Chassis with Cowl $655.001
Notes:
1 1930 prices, US dollars, f.o.b. Lansing
Serial Number Range
- L-1001 to L-1098
- The serial number is located on the name plate attached to the upper toe board.
|
Specifications
- ENGINE
- Six-cylinder "L" Head, 3¼" bore by 4" stroke. Displacement 199 cubic inches. Brake horsepower, 57 at 2800 R.P.M. Pistons, isometric type, made of Bohnalite with invar struts; crankcase vapor remover.
- CRANKSHAFT
- Drop forged, heat treated, weight 48 pounds. 4 main bearings..
- ENGINE LUBRICATION
- Full force feed system; oil filter; gear type pump forces oil to all crankshaft and camshaft bearings, and timing chain; oil spray for wrist pins, cylinder walls and valve mechanism.
- COOLING SYSTEM
- Centrifugal water pump; thermostat control of temperature; four blade fan driven by V belt from crankshaft; water capacity of cylinder jacket and radiator 14 quarts.
- GASOLINE SUPPLY
- 14 gallon fuel tank; diaphram pump, fuel feed.
- CARBURETOR
- 1¼" carburetor equipped with accelerating device and economizer.
- CLUTCH
- 9" single dry disc; with rubber insulated center.
- TRANSMISSION
- 3-Speed, heavy duty transmission mounted as unit of powe plant.
- SPRINGS
- Front - Overslung, semi-elliptic; length 36", width 1¾"; self-adjusting spring shackles. Rear - Overslung, semi-elliptic; length 55"; width, 2"; self-adjusting spring shackles.
- FRONT AXLE
- Reverse Elliott type; drop forged, heat-treated I-beam.
- REAR AXLE
- Semi-floating; spiral bevel driven; strattle mounted pinion; ratio 4.4:1.
- BRAKES
- Steeldraulic, four-wheel brakes; hand brake operates on all four wheels.
- CHASSIS LUBRICATION
- Pressure gun.
- WHEELS
- Wood artillery type.
- TIRES
- 29 x 5 balloon tires.
- WHEELBASE
- 112 inches
- STARTING, LIGHTING, IGNITION
- 6-volt, belt driven generator; manual and automatic spark control.
- STANDARD EQUIPMENT
- Front bumper; head, tail and stop lights; front and rear fenders; full running board; spare rim; tool kit; grease gun; and jack. Coincidental ignition switch and coil lock; ammeter; electric gasoline gauge; electric engine temperature indicator; oil pressure gauge and speedometer.
References
| |